Ruckus Wireless ZoneDirector 1100 User Manual page 97

Table 15. Trap notifications
Trap Name
ruckusZDEventClientAuthFailed
ruckusZDEventClientAuthorization
Failed
ruckusZDEventAPcoldstart
ruckusZDEventAPwarmstart
ruckusZDEventAPclientValve
ruckusZDEventAPCPUvalve
ruckusZDEventAPMEMvalve
ruckusZDEventSmartRedundancyChan
getoActive
ruckusZDEventSmartRedundancyActi
veConnected
ruckusZDEventSmartRedundancyActi
veDisconnected
ruckusZDEventSmartRedundancyStan
dbyConnected
ruckusZDEventSmartRedundancyStan
dbyDisconnected
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Enabling Network Management Systems
Description
A client authentication attempt has failed.
The client's MAC address, AP's MAC
address, SSID and failure reason are
included.
A client authorization attempt to join an AP
has failed. The client's MAC address, AP's
MAC address and SSID are included.
An AP has been cold started.
An AP has been warm started.
Triggered when an AP's online client limit has
been exceeded.
An AP's CPU utilization has exceeded the set
value.
An AP's memory utilization has exceeded the
set value.
The standby Smart Redundancy
ZoneDirector has failed to detect its active
peer, system changed to active state.
The active Smart Redundancy ZoneDirector
has detected its peer and is in active/
connected state.
The active Smart Redundancy ZoneDirector
has not detected its peer and is in active/
disconnected state.
The standby ZoneDirector has detected its
peer and is in standby/connected state.
The standby ZoneDirector has not detected
its peer and is in standby/disconnected
state.
Configuring SNMP Support
97