Configuring Hotspot 2.0 Venue Settings For An Ap - Ruckus Wireless ZoneDirector 1100 User Manual

20 Click OK to save your settings.
Figure 133. Ethernet port configuration - Override Group Config

Configuring Hotspot 2.0 Venue Settings for an AP

If this Access Point will be serving a Hotspot 2.0 hotspot, you can set the Venue
Name for the venue at which the AP will be operating. You can create up to two
Venue Names (two languages for the venue name).
To set the Hotspot 2.0 Venue Name for an AP
1 Go to Configure > Access Points.
2 Click the Edit link next to the AP you want to configure.
3 Scroll down to the bottom and expand the Hotspot 2.0 Settings section.
4 Click Create New to create a new venue name for this AP. Select the language
and enter the venue name in that language.
5 Click Save to save the entry, and click OK to save the Venue Name settings for
the AP.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Managing Access Points Individually
Configuring Hotspot 2.0 Venue Settings for an AP
257