Ruckus Wireless ZoneDirector 1100 User Manual page 103

• Dynamic VLANs are not supported.
• Some AP models are incompatible with this feature due to memory requirements.
To configure rules for AP site bridging Bonjour services across VLANs:
1 Go to Configure > Bonjour Gateway.
2 Click Create New in the AP Site table to create a new Bonjour service rule.
3 In the Create New form, configure the following options:
• Bridge Service: Select the Bonjour service from the list.
• From VLAN: Select the VLAN from which the Bonjour service will be
advertised.
• To VLAN: Select the VLAN to which the service should be made available.
• Notes: Add optional notes for this rule.
4 Click OK to save your changes.
5 Repeat for any additional rules.
1 Select the check box next to Enable Bonjour gateway on AP and click the
Apply button.
Figure 52. Create an AP site Bonjour policy
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Enabling Bonjour Gateway
Creating a Bonjour Gateway Rule - AP Site
103