Ruckus Wireless ZoneDirector 1100 User Manual page 115

Configuring Self Healing Options
Load Balancing
Figure 58. Enable Load Balancing across adjacent APs by radio type
To disable Load Balancing on a per-WLAN basis:
1 Go to Configure > WLANs.
2 Click the Edit link beside the WLAN for which you want to disable load balancing.
3 Click the Advanced Options link to expand the options.
4 Select Do not perform load balancing for this WLAN service next to Load
Balancing.
115
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B