Ruckus Wireless ZoneDirector 1100 User Manual page 43

• Stop bits: 1
• Flow control: None
Figure 11. Configure a terminal client
4 Click OK or Open to connect (depending on your terminal client).
5 At the Please Login prompt, enter the admin login name (default: admin) and
password (default: admin).
You are now logged into ZoneDirector with limited privileges. As a user with limited
privileges, you can view a history of previously executed commands and ping a
device. If you want to run more commands, you can switch to privileged mode by
entering enable at the root prompt.
To view a list of commands that are available at the root level, enter help or ?.
For more information on using the CLI, see the Ruckus Wireless ZoneDirector
Command Line Interface Reference Guide, available from
uswireless.com/.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Accessing ZoneDirector's Command Line Interface
Firewall Ports that Must be Open for ZoneDirector Communications
http://support.ruck-
43