Ruckus Wireless ZoneDirector 1100 User Manual page 233

Setting
Call Admission Control (Disabled by default). Enable Wi-Fi Multimedia Admission
Spectralink
Compatibility
IP Mode
Location Based
Service
ChannelFly
Model Specific Control Use this section to configure max clients, LEDs and port
Group Settings
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Description
Control (WMM-AC) to support Polycom/Spectralink VIEW
certification. See Advanced Options
for more information.
(Disabled by default). Enable this option if this AP radio will be
used as a voice WLAN for Polycom/Spectralink phones. This
option changes several AP radio settings such as DTIM, BSS
minrate and RTS-CTS to improve voice quality with Spectralink
phones.
For optimal VoWLAN voice quality, also disable Self-Healing
and Background Scanning from the Configure > Services
page).
Set IPv4, IPv6 or dual-stack IPv4/IPv6 IP addressing mode.
Enable this option to enable ZoneDirector's share in the Ruckus
SmartPositioning Technology (SPoT) location based service
solution. Enter the SPoT server URL, port, password and venue
name as configured on the SmartPositioning server.
For information on configuration and administration of Ruckus
SmartPositioning Technology (SPoT) service, please refer to the
SPoT User Guide, available from the Ruckus support site:
https://support.ruckuswireless.com.
Enable this check box to allow ZoneDirector to disable
ChannelFly on an AP if the AP's uptime is greater than the value
entered for the AP group. This feature can be useful if
ChannelFly causes client connection instability due to APs
restarting and re-running the ChannelFly scanning process. The
option is supported on specific 11n APs only.
settings for all APs of each specific model that are members of
the group. See Modifying Model Specific
The Group Settings section is used to move access points
between groups. See
Membership.
Working with Access Point Groups
Modifying the System Default AP Group
under Creating a WLAN
Controls.
Modifying Access Point Group
233