Ruckus Wireless ZoneDirector 1100 User Manual page 203

Deploying ZoneDirector WLANs in a VLAN Environment
Tagging Management Traffic to a VLAN
NOTE: ZoneDirector will need to be rebooted after changing management VLAN
settings.
8 Go to Administer > Restart, and click Restart to reboot ZoneDirector.
CAUTION! When configuring or updating the management VLAN settings, make
sure that the same VLAN settings are applied on the Configure > Access Points >
Access Point Policies > Management VLAN page, if APs exist on the same VLAN
as ZoneDirector.
Figure 107. Configuring management VLAN for ZoneDirector
203
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B