Ruckus Wireless ZoneDirector 1100 User Manual page 174

Using an External AAA Server
RADIUS / RADIUS Accounting
1 On the Configure > AAA Servers page, locate the Test Authentication Settings
section.
2 Select the authentication server that you want to use from the Test Against
drop-down menu.
3 In User Name and Password, enter an Active Directory, LDAP or RADIUS user
name and password.
4 Click Test.
If ZoneDirector was able to connect to the authentication server and retrieve the
configured groups/attributes, the information appears at the bottom of the page.
The following is an example of the message that will appear when ZoneDirector
authenticates successfully with the server:
Success! Groups associated with this user are "{group_name}".
This user will be assigned a role of {role}.
If the test was unsuccessful, there are three possible results (other than success)
that will be displayed to inform you if you have entered information incorrectly:
• Admin invalid
• User name or password invalid
• Search filter syntax invalid (LDAP only)
These results can be used to troubleshoot the reasons for failure to authenticate
users from an AAA server through ZoneDirector.
174
Ruckus Wireless, Inc.