Changing the System Log Settings
Customizing the Current Log Settings
4 You must also ensure that syslog delivery is enabled on the Configure > System
page and that the Priority level in Remote Syslog Advanced Settings is set
to Info or All.
Figure 39. Enable client association logs in syslog for firewall integration
The flow of user data from the end point to the firewall will use the following path:
1 The user authenticates to an authentication server via AP.
2 ZoneDirector verifies the user's identity.
3 After the station authenticates successfully and gets an IP address, ZoneDirector
generates a syslog message.
4 The log is sent to a syslog server in real time.
5 The script on the syslog server extracts user information from the log message
and sends it to the firewall.
A similar flow can be used to remove user mappings if the station sends a disconnect
message.
80
Ruckus Wireless, Inc.