Ruckus Wireless ZoneDirector 1100 User Manual page 280

Monitoring Access Point Status
Using the AP Status Overview Page
Device Name
Description
Location
Model
Status
Mesh Mode
IP Address
External IP: Port
VLAN
Channel
Clients
Bonjour Gateway
Application Capability
280
The AP's "name." This can be modified on the Configure
> Access Points page by clicking the Edit link next to the
AP's MAC address.
The AP's "description." This can be modified on the
Configure > Access Points page by clicking the Edit link
next to the AP's MAC address.
The AP's "location." This can be modified on the Configure
> Access Points page by clicking the Edit link next to the
AP's MAC address.
The ZoneFlex model number.
Displays the current status of the AP from ZoneDirector's
perspective:
Approval Pending
Connected
Disconnected
Root AP
Mesh AP
eMesh AP
Number of hops
Displays whether the AP is manually set as a Root or Mesh
AP, or set to automatically choose Mesh mode.
The IP address of the AP.
This column displays the public IP and port number for
APs connected via Layer 3 behind a NAT device.
The VLAN ID, if configured.
Displays the channel number and channel width. On dual
band APs, details for each radio are shown.
The number of clients currently connected to this AP.
Indicates whether Bonjour Gateway service is enabled,
disabled or not supported on this AP.
Indicates whether Application Visibility is enabled, disabled
or not supported on this AP.
Ruckus Wireless, Inc.