Ruckus Wireless ZoneDirector 1100 User Manual page 82

Changing the System Log Settings
Customizing the Current Log Settings
Configuring Remote Syslog Advanced Settings
Advanced Syslog settings allow you to override the default Facility Name and Priority
Level of messages sent to the syslog server. In this way, users can separate different
kinds of syslogs according to the facility name on the syslog server side.
To configure remote syslog advanced settings:
1 Go to Configure > System.
2 Scroll down to Log Settings, and expand the Remote Syslog Advanced
Settings section.
3 In ZoneDirector Settings, set the facility name as follows:
• Keep Original: Retain the original facility name.
• local0 - local7: Specify facility name.
4 Set the priority level as follows:
• All: Include all syslog messages.
• 0(emerg), 1(alert), 2(crit), 3(err), 4(warning), 5(notice), 6(info), 7(debug): Lower
numbers indicate higher priority. The syslog server will only receive logs
whose priority levels are the same as or higher than the configured level.
5 Repeat step 4 for Managed AP Settings. ZoneDirector and Access Points can
use different facility and priority settings. All managed APs share the same facility
and priority settings.
82
Ruckus Wireless, Inc.