Ruckus Wireless ZoneDirector 1100 User Manual page 122

Configuring Self Healing Options
Tunnel Configuration
• Block broadcast traffic from network to tunnel except ARP and DHCP:
Prevents all broadcast traffic other than Address Resolution Protocol and
DHCP packets.
• Enable Proxy ARP of tunnel WLAN with rate limit threshold __.:
Reduces broadcast neighbor discovery packets (ARP and ICMPv6 Neighbor
Solicit) over tunnels. When ZoneDirector receives a broadcast ARP request
for a known host, it acts on behalf of the known host to send out unicast
ARP replies at the rate limit specified. If ZoneDirector receives a broadcast
ARP request for an unknown host, it will forward it to the tunnel to all APs
according to the rate limit threshold set in the Packet Inspection Filter (see
Packet Inspection
4 Click Apply in the same section to save your changes.
Figure 65. Set tunnel configuration parameters for all WLANs with tunnel mode enabled.
122
Filter).
Ruckus Wireless, Inc.