Ruckus Wireless ZoneDirector 1100 User Manual page 93

• Privacy Phrase: If either DES or AES is selected, enter a Privacy phrase
between 8 and 32 characters in length.
4 Click Apply to save your changes.
Figure 46. Enabling the SNMPv3 agent
Enabling SNMP Trap Notifications
If you have an SNMP trap receiver on the network, you can configure ZoneDirector
to send SNMP trap notifications to the server. Enable this feature if you want to
automatically receive notifications for AP and client events that indicate possible
network issues (see
To enable SNMP trap notifications
1 In the Network Management section of the System page, scroll down to the
bottom of the page.
2 Under SNMP Trap, select the Enable SNMP Trap check box.
3 In SNMP Trap format, select either SNMPv2 or SNMPv3. You can select only
one type of trap receiver.
• If you select SNMPv2, you only need to enter the IP addresses of up to four
SNMP trap receivers on your network.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Trap Notifications That ZoneDirector
Enabling Network Management Systems
Configuring SNMP Support
Sends).
93