Ruckus Wireless ZoneDirector 1100 User Manual page 171

You have completed configuring Microsoft IAS for PAP authentication.
TACACS+
Terminal Access Controller Access-Control System Plus (TACACS+) is an Authen-
tication, Authorization and Accounting protocol used to authenticate ZoneDirector
administrators. ZoneDirector admins can be assigned any of the same three
administration privilege levels that can be set manually on the Configure > Roles
page:
• Super Admin (Perform all configuration and management tasks)
• Operator Admin (Change settings affecting single AP's only)
• Monitoring Admin (Monitoring and viewing operation status only)
TACACS+ is an extensible AAA protocol that provides customization and future
development features, and uses TCP to ensure reliable delivery. The daemon should
listen at port 49 which is the "login" port assigned for the TACACS protocol.
To authenticate ZoneDirector admins using a TACACS+ AAA server:
1 Go to Configure > AAA Servers.
2 In Authentication/Accounting Servers, click Create New.
3 Enter a Name for the TACACS+ server, and select TACACS+ for Type.
4 Enter the server's IP address and do not change the Port setting from the default
port 49 (in general).
5 In TACACS+ Service, enter a string of up to 64 characters. This name must
match the name of the service configuration table on the TACACS+ server. Click
OK to save your changes.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Using an External AAA Server
RADIUS / RADIUS Accounting
171