3 Once an LWAPP tunnel between the AP and ZoneDirector has been established,
ZoneDirector automatically pushes the corresponding USB drivers, network
connection scripts and configuration files to the AP.
4 The AP saves the files to its persistent storage.
5 Disconnect the wired network connection, then reboot the AP.
6 After reboot, the AP detects the appropriate drivers on its persistent storage,
goes through the 3G/4G/LTE network connection process and establishes an
LWAPP tunnel with ZoneDirector.
7 ZoneDirector pushes the 802.11 wireless configuration to the AP.
8 The AP implements the 802.11 wireless configuration and is ready to provide
802.11 wireless services.
9 A wireless client connects to the AP's 802.11 wireless service, and the data traffic
is tunneled to ZoneDirector through the LWAPP tunnel.
Figure 131. Importing a USB software package
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Importing a USB Software Package
Using Limited ZD Discovery for N+1 Redundancy
253