Ruckus Wireless ZoneDirector 1100 User Manual page 217

Figure 113. Hotspot 2.0 Operator profile configuration options
Option
Additional Connection Capability
4 Click OK to save this Operator Profile.
5 Continue to
Figure 114. Creating a Hotspot 2.0 Operator Profile
Create a Hotspot 2.0 WLAN
After you create a HS2.0 service, you need to specify the WLANs to which you want
to deploy the hotspot configuration. To configure an existing WLAN to provide
hotspot service, do the following:
1 Go to Configure > WLANs.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Create a Hotspot 2.0
Description
Allows addition of custom connection capability
rules. Up to 21 custom rules can be created.
WLAN.
Creating a Hotspot 2.0 Service
Create a Service Provider Profile
217