Ruckus Wireless ZoneDirector 1100 User Manual page 353

3 Verify that a mesh network has been formed by checking if dotted lines appear
between the mesh nodes. These dotted lines identify the neighbor relationships
that have been established in the current mesh network.
NOTE: If your mesh spans multiple ZoneDirectors, it is possible for a node to be
associated to a different ZoneDirector than its parent or children.
Figure 189. Dotted lines indicate that these APs are part of the wireless mesh network
The symbols next to the AP icons indicate whether the AP is a Root AP, Mesh AP
or eMAP. Refer to the following table:
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
An AP with the upward pointing arrow is a Root AP.
An AP with a number in a circle is a Mesh AP. The number indicates
the number of hops from the mesh AP to the Root AP.
An AP with a dimmed blue square indicates that it is a Root AP without
any active downlinks.
An AP with a red square is an Ethernet-Linked Mesh AP (eMAP).
Deploying a Wireless Mesh via ZoneDirector
Step 4: Verify That the Wireless Mesh Network Is Up
353