Ruckus Wireless ZoneDirector 1100 User Manual page 168

Using an External AAA Server
RADIUS / RADIUS Accounting
Table 16. RADIUS attributes used in Accounting
WLAN Type Attribute
WISPr / Web
Auth / Guest
Access
Configuring Microsoft IAS for PAP Authentication
If you are using Microsoft Internet Authentication Service (IAS) as your RADIUS
server and PAP authentication, you will need to configure your user/group profiles
to use only PAP authentication rather than the default (MS-CHAP). If you selected
CHAP under
PAP authentication.
To configure user/group profiles for PAP authentication:
1 From the Internet Authentication Service main page, select the user or group for
which you want to configure PAP authentication.
2 Right-click the user or group and select Properties to open the [user/group
name] Properties dialog box.
3 On the Properties dialog box, click Edit Profile.... The Edit Dial-in Profile dialog
box opens.
4 Click the Authentication tab at the top of the screen.
5 Select Unencrypted authentication (PAP, SPAP).
168
Specific to Interim Update and Stop messages:
(42) Acct input octets
(43) Acct output octets
(44) Acct session ID
(46) Acct session time
(47) Acct input packets
(48) Acct output packets
(52) Acct input giga words
(53) Acct output giga words
(55) Event timestamp
Ruckus private attribute:
Vendor ID: 25053
Vendor Type / Attribute Number: 2 (Ruckus-Sta-RSSI)
Additional attributes supported in WISPr WLANs:
WISPr vendor specific attributes (vendor id = 14122)
(1) WISPr location id
(2) WISPr location name
"RADIUS / RADIUS Accounting", you do not need to configure IAS for
Ruckus Wireless, Inc.