Figure 49. Creating a DHCP Relay server
To enable DHCP Relay for a WLAN:
1 Go to Configure > WLANs.
2 If creating a new WLAN, click Create New. Otherwise, click Edit for the WLAN
you want to configure.
3 Under Advanced Options, when Tunnel Mode is enabled, the DHCP Relay
option becomes available.
4 Under DHCP Relay, select Enable DHCP relay agent with __ DHCP server
and select the server you created earlier from the list.
5 Click OK to save your changes.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Configuring DHCP Relay
Configuring SNMP Support
99