Measuring Wireless Network Throughput with SpeedFlex
If WLAN Connection Problems Persist
mance test can continue. Click the OK button on the message, download
the appropriate SpeedFlex version (Windows, Mac or Android) from http:/
/<ZoneDirector-IP-Address>/perf, and email it to the user, or
instruct the user to go to http://<ZoneDirector-IP-Address>/
perf to download and install it. (See
Wireless
click Start again to continue with the wireless performance test.
A progress bar appears below the speedometer as SpeedFlex generates traffic to
measure the downlink or uplink throughput. One throughput test typically runs for
10-30 seconds. If you are testing both Downlink and Uplink options, the two tests
take about one minute to complete.
When the tests are complete, the results appear below the Start button. Downlink
and uplink throughput results are displayed along with packet loss percentages.
Figure 205. The SpeedFlex interface
394
Throughput.) After SpeedFlex is installed and running on the client,
Allowing Users to Measure Their Own
Ruckus Wireless, Inc.