Ruckus Wireless ZoneDirector 1100 User Manual page 372

Working with Backup Files
Restoring Archived Settings to ZoneDirector
• Restore everything, except system name and IP address settings (for failover
deployment at the same site): Select this option to import settings saved from
a primary to a backup ZoneDirector for Smart Redundancy deployment.
NOTE: In addition to system name and IP address, this option restores everything
except for the following configuration settings: 1.) VLAN settings. 2.) Management
IP address and VLAN settings. 3.) Smart Redundancy settings. 4.) DHCP server
settings. 5.) Session timeout. 6.) Limited ZD Discovery and Management VLAN
settings in Access Point Policies.
• Restore only WLAN settings, access control list, roles, and users (use this as
a template for different sites): Select this option if you want to use the backup
file as a configuration template.
5 Click the Restore button.
ZoneDirector restores the backup file. During this process, ZoneDirector automati-
cally logs you out of the web interface. When the restore process is complete,
ZoneDirector automatically restarts and your wireless network will be ready for use
again.
Figure 195. Select the restore level for restoring from a backup file
372
Ruckus Wireless, Inc.