Ruckus Wireless ZoneDirector 1100 User Manual page 21

LED Label
Ethernet Link
Ethernet Rate
CAUTION!
port. Ethernet ports on any uplink switch must be set to 100Mbps auto-negotiation
or 1000Mbps auto-negotiation.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
State
Solid Green or
Amber
Flashing Green or
Amber
Off
Green
Amber
ZoneDirector 1100 can become disabled if half-duplex is forced on any
ZoneDirector Physical Features
Meaning
The port is connected to a device.
The port is transmitting or receiving
traffic.
The port has no network cable
connected or is not receiving a link
signal.
The port is connected to a 1000Mbps
device.
The port is connected to a 100Mbps or
10Mbps device.
ZoneDirector 1100
21