Siemens SIMATIC MV440 Operating Instructions Manual page 381

M16 – ASM cable
This cable is for connection to ASM devices such as RFC180C and ASM456. Power can
also be supplied via this cable allowing the reader to be operated with only one cable. This
cable is suitable only for the SIMATIC MV420.
Order number
6GF3420-0AC00-2CB0
M16 power cable / power I/O cable / power I/O RS232 cable
These cables are used for the camera voltage supply. The power I/O RS232 cable also has
wires for connecting digital inputs/outputs and the RS-232 serial interface.
Order number
6GF3400-0BH15
6GF3400-1BH20
6GF3440-8BA2
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
Components of the product/spares/accessories
Cables and connectors
2 m
Cables
1.5 m MV400 push-pull power
cable
M16 with connector prefitted
•
at one end
Prefitted push-pull
•
For power supply only, no
•
I/O, no RS 232
Length: 1.5 m
•
2 m MV400 push-pull power
cable
M16 with connector prefitted
•
at one end
Open end
•
Push-pull connectors
•
supplied
For power supply only, no
•
I/O, no RS232
Length: 2 m
•
SIMATIC MV440/
SIMATIC MV420 power IO RS-
232 cable
M16 with connector prefitted
•
at one end
Open end
•
Length: 10 m
•
Lines for I/O and RS232
•
15.2 Accessories
Note
Suitable for readers:
6GF3420-0AA20
•
6GF3420-0AA40
•
6GF3420-0AX20
•
6GF3420-0AX40
•
Note
Suitable for all SIMATIC MV400
readers
Suitable for all SIMATIC MV400
readers
Suitable for all SIMATIC MV400
readers
379