System Setup Via The Rs-232 Interface - Siemens SIMATIC MV440 Operating Instructions Manual

Network and system interfacing

5.5 System setup via the RS-232 interface

5.5 System setup via the RS-232 interface
Acquisition and output of recognition values via the RS-232 interface
Figure 5-4
System characteristics
● The reader results are output via the RS-232 interface.
● The reader is triggered either via the digital I/O, RS-232 or by the integrated auto-trigger
function.
● A PC/programming device is connected via Ethernet to allow adjustment of the device.
104
Example: System setup via the RS-232 interface
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06