Siemens SIMATIC MV440 Operating Instructions Manual page 12

Introduction
Purpose of this documentation
These instructions contain all the information you need for commissioning and using the
device.
It is intended both for persons installing the device mechnically, connecting it electronically,
configuring the parameters and commissioning it as well as service and maintenance
engineers.
Note
• Read the operating instructions before starting to work with this device. The operating
instructions contain all the important information about the device.
• Noting and acting on this information:
– Ensures the device functions correctly
– Saves you service costs
Screenshots in the Operating Instructions
The screenshots shown in these Operating Instructions are based on the user interface
display of SIMATIC MV440. Many parts of the user interface of SIMATIC MV420 are the
same as those in SIMATIC MV440. Any functional differences are pointed out in the
description.
History
This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware:
Edition
01
03/2009
02
12/2009
03
04/2010
10
Firmware Remark
V1.0.0 First edition (SIMATIC MV440 only)
V2.1.0 Editorial revision as regards content.
V3.0 Editorial revision as regards content.
Integration of new functions
Optical character recognition (OCR) option for all SIMATIC MV440
•
readers
User interface starts in seconds
•
Advanced control commands for control via RS232/TCP
•
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06