Siemens SIMATIC MV440 Operating Instructions Manual page 162

Operator control and monitoring
9.2 Working with the user interface
Image control
Figure 9-2
Image control is displayed for many of the task pages. Image control contains the image,
and for some tasks also the overlays.
"Image" drop-down list
You select the image source, e.g. "Cyclic", "Triggered (live)", or "Program X".
Table 9- 1
160
Image control
"Image" drop-down list symbols
Update display
Updates the image display and also updates the result display, if necessary.
Show details
Enables and disables the display of result details in the image.
A right click on the button opens a shortcut menu in which the details to be displayed can be
selected.
Zoom
Switches between the display of the entire image (reduced) and the image section in full
resolution.
Full screen
Opens the image in full size and full resolution in a new window.
Save image
Saves the currently displayed image on your PC.
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06