Table of Contents
Advertisement
Installation
6.2 Installing SIMATIC MV420/SIMATIC MV440
Mounting the SIMATIC MV440 reader with a lighting unit
If you require a lot of light for the applications, you can connect an external lamp. The
external lamp is also used, for example, when the incident light is not parallel to the viewing
direction with strongly reflecting objects.
①
②
③
④
Figure 6-3
Install the following:
1. Your selected lens
2. Protective lens cover ∅ 50
3. Ring light holder (external)
4. Lighting unit
5. At the installation site, screw the reader directly into the securing holes or to the "reader
mounting plate", see Dimension drawings (Page 361).
116
Lighting unit SIMATIC Vision Sensor
VS100
Socket for lighting unit
Reader
Hole for securing device
Mounting the SIMATIC MV440 reader with a lighting unit
①
⑤
Ring light holder (external)
⑥
Protective lens cover ∅ 50
⑦
Securing screws
⑥
⑤
Operating Instructions, 04/2013, A5E02371045-06
SIMATIC MV420 / SIMATIC MV440
Advertisement
Table of Contents
