5.7
System setup for reader and RFID reader on a communication
module
Figure 5-6
System characteristics
● To operate in mixed mode, the reader can be connected to an RFID SLG, for example of
the RF300 series on a communication module, for example, an ASM 456.
● Both the reader and the RFID reader are integrated in STEP 7 by the function block FB45
or Ident profile.
● A PC/programming device is connected via Ethernet to allow adjustment of the device.
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
5.7 System setup for reader and RFID reader on a communication module
Example: System setup for reader with RFID reader on a communication module
Network and system interfacing
107