Commissioning
8.4 Transferring optional licenses
3. step: Transfer a license to a SIMATIC code reader
NOTICE
Reader must be stopped for license transfer
The reader cannot be in RUN mode when transferring a license to the reader.
• Ensure that the reader is stopped.
Note
The reader only tolerates one Automation License Manager connection
The reader will only tolerate one Automation License Manager connection at a given time.
You cannot connect two PCs to the reader at once.
• Disconnect the first connection before attempting to establish a new connection from
another PC.
1. Run Automation License Manager.
144
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06