Siemens SIMATIC MV440 Operating Instructions Manual page 108

Network and system interfacing
5.6 System setup via the Ethernet interface
Figure 5-5
System characteristics
● The reader results are output via the Ethernet interface.
● The reader can be triggered in the following ways:
– Digital I/O
– TCP/IP
– The integrated autotrigger function
● A PC/programming device is connected via Ethernet and a switch to allow adjustment of
the device.
106
Example: System setup via the Ethernet interface
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06