Table of Contents
Advertisement
Commissioning
8.3 Establishing a connection to the reader and starting the user interface
5. Select "Assign IP parameters" and enter the values for the IP address and subnet mask
as shown below.
Note
IP address 192.168.100.100
• Using the IP address 192.168.100.100 simultaneously configures the reader as a
• If your PC network is configured differently or you do not know how your PC is
136
DHCP server, which means that a connected PC can obtain an IP address from the
reader. You may use addresses that differ from this IP address and that are not
0.0.0.1 to assign a static IP address to the reader. PCs operating in a network are
usually configured as DHCP clients and obtain their IP addresses from a server.
configured, check with your system administrator.
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
Advertisement
Table of Contents
