Siemens SIMATIC MV440 Operating Instructions Manual page 212

Operator control and monitoring
9.2 Working with the user interface
● In the "Monitoring" group box, you specify whether or not a live image is displayed in
processing mode.
● In the "Persistence" group box, you specify which diagnostic information you want to
store permanently on the EPROM.
– If the "Save NOK image" check box is enabled, the image of the next NOK signal will
– If the "Save diag. entries" check box is selected, all diagnostics entries you specify in
● In the "Character fonts" group box, you determine whether prototypes for the "Supervised
training" function should be recorded in processing mode.
Note
Detailed description of parameters in the online help
For a detailed description of the parameters and possible values, refer to the online help.
210
be stored. If an image has already been stored, it will be overwritten when this function
is selected.
the input box from the time of enabling will be entered in the EPROM. Existing entries
are deleted when you switch to On. If the diagnostics buffer in the EPROM reaches
the number of permanently storable diagnostic data records, no further entries are
made.
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06