Configuration - Siemens SIMATIC MV440 Operating Instructions Manual

Simatic ident code reader system
Hide thumbs Also See for SIMATIC MV440:
Table of Contents

Advertisement

10.7.1

Configuration

Slave and master
Both on the slave readers and on the master, you need to make the following settings in the
adjustment support.
Image acquisition, "Control" tab
● To control the image acquisition, select the "Auto trigger" mode (without "Initial trigger").
"Recognize double reads" must be set to 1 in this case.
The acquisition interval must be adequately high so that 1D/2D codes can be read in the
image. The interval must be identical on all slave and master devices.
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
Process interfacing via an automation system (PLC, PC)
10.7 Scanner portal application
319

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic mv420

Table of Contents