Network and system interfacing
5.8 System setup for the reader with auto-trigger
5.8
System setup for the reader with auto-trigger
Figure 5-7
System characteristics
● Power supply and system integration are, for example, via an ASM 456 or via Ethernet.
● To trigger the reader, a light barrier or similar must be installed; the triggering itself is
performed on the reader as soon as a legible code enters the reader viewing field (auto
trigger).
● A PC/programming device is connected via Ethernet to allow adjustment of the device.
108
Example: System setup for reader with auto-trigger function
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06