Siemens SIMATIC MV440 Operating Instructions Manual page 330

Process interfacing via an automation system (PLC, PC)
10.8 Remote client
Response
● HTTP status code 200 (OK)
● Data:
– "2" -> XML upload and import were only partially successful.
– "1" -> XML upload and import was only successful.
– "0" -> Error importing.
328
The reader restarts. To obtain an error analysis, the XML import must be repeated
using the adjustment support.
The reader restarts.
To obtain an error analysis, the XML import must be repeated using the adjustment
support. The IN_OP bit is set and access using the adjustment support is permitted
again.
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06