D9824 Receiver Lock Levels; Video; Aspect Ratio - Cisco D9824 Installation And Configuration Manual

Appendix C
Lock Levels

D9824 Receiver Lock Levels

Four (4) lock levels (0, 1, 2, 3, and 4) are available for protecting your receiver and its
settings against unauthorized use or modification (see the table below for full
details).
Level
0
1
2
3
4
If a change made to the current Lock Level setting is not saved, the previously saved setting
is restored.
Note: The user cannot select NONE as a Lock Level.

Video

Parameter
PV Format
SD Format

Aspect Ratio

Parameter
SD Aspect Ratio
AR Selection
AR Conversion
WSS Mode
294
Description
All settings are unlocked (receiver lockout disabled)
All settings are unlocked except Factory Reset,
Password options and receiver parameters.
All settings are unlocked except RF and ASI Input
Tuning parameters.
All settings locked (access via password only), except IP
address and RF power.
All settings locked (can be changed via PNC uplink
signal only)
Lock Level
2
2
Lock Level
2
2
2
2
78-4039426-01 Rev D