Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Password Complexity
No Checking
Minimal Checking
Full Complexity Checking
Note: The complexity level changes will only affect the new user accounts and
password changes. It will not affect existing passwords. Any changes take effect
immediately, and do not require the use of the Apply button.
To change your login password:
Note: You are allowed to only modify your own password.
1
The Change Password for User displays the password for the current login.
2
In the Enter Current Password, type the current login password.
3
In the Enter New Password, type the new login password.
204
Description
There are no restrictions on passwords.
Note: A minimum of one character is required.
A password must comply with the following
requirements:
It cannot contain username or reversed
username.
It cannot contain any of the following strings:
cisco, sciatl, ocsic, ltaics, atlsci, icslta, or any
string achieved by full or partial capitalization
of letters.
No letter is repeated more than three times in a
row.
Must contain a minimum of four characters.
A password must comply with the following
requirements:
It cannot contain username or reversed
username.
It cannot contain any of the following strings:
cisco, sciatl, ocsic, ltaics, atlsci, icslta,or any
string achieved by full or partial capitalization
of letters.
No letter is repeated more than three times in a
row.
Must contain a minimum of eight characters.
Must contain a minimum of three of the
following types of characters: capital letters,
small letters, digits, and special characters.
78-4039426-01 Rev D
- Quick Links:
- Logging on to the Web Interface
Hide quick links:
Advertisement
Table of Contents
