Setup Menu: Ts Input - Cisco D9824 Installation And Configuration Manual

Setup Menu: TS Input

To view the TS (Transport Stream) Input menu from the Main menu, press the
RIGHT arrow key once and then the SELECT key to reach the Setup menu. Then
press the RIGHT arrow key once and the SELECT key to view the TS Input menu.
For instructions on how to select and store settings, see About the Front Panel (on
page 32).
The TS Input menu has the following structure:
ASI Input
Menu Item
ASI Active
Tune Mode
78-4039426-01 Rev D
Description
Select whether to tune to the ASI input.
Note: Setting a new input to be active
will deactivate the currently active
input.
Select the tables required for the service
list creation and signal acquisition.
Setup Menu
Parameters
Act or No
Basic - Requires NIT to be present.
Auto - Uses all the available
service list tables and it will
acquire if any table is present.
Custom - Uses the Custom Tuning
parameters, specified by the user.
The default is Basic.
57