Printing The List Of Users; Resetting The Login Credentials - Cisco D9824 Installation And Configuration Manual

Chapter 3 Installation

Printing the List of Users

At the D9824 prompt, type
Note: Only usernames will be printed. Passwords will not be visible.

Resetting the Login Credentials

At any time, the user authentication table can be reset from the front panel. This
option is under the Setup: IP: IP menu. Scroll down to Reset Credentials and press
SELECT. Press and then press SELECT to confirm the operation. A new login
username and randomly generated password will be displayed on the front panel
display for approximately 30 seconds. The new account will have Admin privileges.
It is recommended that this account be replaced by a login username and password
chosen by the administrator. To change the username and password, you must be an
Admin user. Refer to Configuring the User Login Passwords (on page 203).
Note: After this recovery procedure, all existing user accounts will be lost.
28
and press Enter.
pwd list_users
78-4039426-01 Rev D