Setup Menu; Structure - Cisco D9824 Installation And Configuration Manual

Setup Menu

Structure

To view the Setup menu from the Main menu, press the RIGHT arrow key once and
the SELECT key. The Setup menu is split into nine parts; Administration, TS Input,
IP, Services, CI, Outputs, CA, Alarms/Warnings, and Noise Cutoff. For instructions
on how to select and store settings, see About the Front Panel (on page 32).
The Setup menu allows you to set all the parameters associated with the following:
Administration - lock level, password, factory reset, keypad lock, download

mode and date and time
TS Input - frequency parameters for acquiring and locking on to an RF signal, or

receiving an ASI input
IP - parameters for setting up the Ethernet ports

Services - audio video, captions, and VBI

CI (Future Use) - parameters to decrypt programming available from service

provider programmers via CAM Smart Cards
Outputs - alarm relays, cue tone/cue trigger setup, parameters for setting up the

transport stream out, which includes DPM
CA - conditional access

Alarms/Warnings - enables alarms/warnings traps and relays

Noise Cutoff - muting thresholds

The Setup menu has the following structure:
78-4039426-01 Rev D
Setup Menu
51