Viewing The Common Interface (Ci) Status - Cisco D9824 Installation And Configuration Manual

Viewing the Common Interface (CI) Status

From the user interface of the D9824, click Input > Conditional Access, expand CI
Setup and then click CI Status. The CI Status page is displayed.
The following table describes the CI Status:
CI Status
CI Slot
CAM Status
Sys Name
Comp Name
Manufacturer Code
Manufacturer ID
Serial Number
Hardware Version
Application Version
78-4039426-01 Rev D
Description
Indicates whether it is the top slot (TOP) or the bottom slot
(BOTTOM).
Status of the CAM (Ready or Not Ready).
System name of the CAM.
Displays the company name of the CAM.
The manufacturer's code.
The factory loaded application number of the CAM.
The unique serial number of the CAM.
The hardware version number of the CAM.
The software version number of the CAM.
Setting up Input Information
145