Cisco D9824 Installation And Configuration Manual page 281

Warning Message
Type
MCT Timeout # Set
MCT Timeout # Clear
ECT Timeout # Set
ECT Timeout # Set
ECT Timeout # Clear
Memory Usage Set
Host
Memory Usage Clear
Host
78-4039426-01 Rev D
Message Cause/Remedy
mct # is lost Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
mct fault cleared
ect # timed out Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
ect # is lost Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
ect fault cleared
Excessive Cause: Possible software
(stack/partition) issue.
memory usage
Remedy: Clear
warnings, reset the unit,
and notify customer
service if the problem
persists.
Normal
(stack/partition)
memory usage
D9824 Alarm Messages
Description
No longer receiving
Inband Control Table.
Event Control Table
was never received.
No longer receiving
Event Control Table.
SW exceeding
allowable memory
usage.
259