Viewing The Alarm/Warning Status - Cisco D9824 Installation And Configuration Manual

Viewing the Alarm/Warning Status

From the user interface of the D9824, click System Settings > Alarms > Status. The
Status page is displayed.
The Status page displays all the active event messages for the D9824 system. The
Fault Summary section displays the Type of message (alarm or warning) and the
number of alarms and warnings that have an active status (Number Active).
The following table shows the Alarm/Warning Status table information:
Status
Type
Name
Text
Set Since
78-4039426-01 Rev D
Description
Shows whether it is an alarm or a warning message.
Name of the alarm or warning. For more information on
alarm messages, refer to Messages (see "D9824 Alarm
Messages" on page 222).
Content of the message.
Date and time of the alarm or warning.
Configuring System Settings
193