Cisco D9824 Installation And Configuration Manual page 155

Parameter
ASI Transport
ASI Packet Size (bytes)
Acquisition State
TS ID
Network ID
5 Click Apply.
78-4039426-01 Rev D
Description
Indicates the current transport synchronization status (Error,
Ok, or N/A).
Indicates the packet size (in bytes) for the ASI input (188, 204,
or N/A).
Displays Full if the ASI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.
The Transport ID (in the range from 1 to 65535).
The Network ID (in the range from 1 to 65535) of the uplink
signal the receiver is to receive when using the selected preset.
The receiver's Network ID must match the Network ID
associated with the transmitted signal that identifies the NIT to
be used.
Note: Each network must be assigned a unique ID (number).
Setting up Input Information
133