Cisco D9824 Installation And Configuration Manual page 272

Chapter 6 Service and Maintenance
Alarm Message
Type
Decoder Set
Processor Start
Decoder Set
Processor Start
Decoder Set
Processor Start
LEC Timeout Set
LEC Timeout Clear
250
Message Cause/Remedy
DB Startup failed Cause: Hardware
issue.
Remedy: Clear
alarms, reset the
unit, and notify
customer service if
the problem
persists.
No Response Cause: Hardware
issue.
Remedy: Clear
alarms, reset the
unit, and notify
customer service if
the problem
persists.
Synchronization Cause: Hardware
Failure issue.
Remedy: Clear
alarms, reset the
unit, and notify
customer service if
the problem
persists.
LEC Table Cause: Possible
Missing/timeout:c LEC Server or
hannels currently Uplink issue.
unavailable
Remedy: If using
RF input, contact
the content
provider. If using
ASI output, ensure
the source has not
been changed for
the content
provider. Clear
alarm and notify
customer service if
the problem
persists.
LEC received
Description Severity
Transfer of Major
operational
parameters to
secondary
processor
failed.
Secondary Major
processor not
responding.
Communicatio Major
n with
secondary
processor
failing.
ECT Table is
not received in
the GDS
stream.
78-4039426-01 Rev D