Cisco D9824 Installation And Configuration Manual page 269

Alarm Message
Type
MPoIP Status Set
MPoIP Status Clear
Boot Host Set
Boot Host Set
78-4039426-01 Rev D
Message Cause/Remedy
MPEGoIP Cause: Uplink
Overflow. Output settings may have
Muted. Reduce changed since
content. setup of the unit.
Variable Bit
Rate/Statmuxed
streams may be in
use.
Remedy: Increase
output rate, drop
unreferenced
content in DPM
Options, drop
programs not
needed for
downstream
devices. Contact
uplink to verify
expected bitrate
settings.
MPEGoIP Output
Restored
KB not accessible Cause: Hardware
issue
Remedy: Clear
alarms, reset unit,
and notify
customer service if
the problem
persists.
LCD not Cause: Hardware
connected issue
Remedy: Clear
alarms, reset unit,
and notify
customer service if
the problem
persists.
D9824 Alarm Messages
Description Severity
Current Minor
transport rate
exceeds
configured rate
for MPEG over
IP output.
Output has
been muted to
protect
downstream
devices.
Minor
KB is not Major
detected by
Boot code.
LCD is not Major
detected by
Boot code.
247