Receiver Description; Receiver Overview; Receiver Features; Receiver Operation - Cisco Prisma II Installation Manual

Receiver Description

Receiver Overview

The Quad EDR Receiver is a plug-in module for the Prisma II and Prisma II XD
platforms. These modules are part of the Prisma II optical network, an advanced
transmission system designed to optimize network architectures and increase
reliability, scalability, and cost-effectiveness.
The receiver module installs into a Prisma II XD Chassis directly, or into a standard
Prisma II Chassis by means of a host module that accepts up to two Prisma II High
Density application modules.
The receiver front panel contains two optical pluggable module (OPM) connectors
that provides inputs for four separate optical receiver circuits. A single test point is
selectable between the two receiver outputs for RF output verification.
All connectors are easily accessible. ALARM and Power ON indicators on the front
panel allow you to monitor power and alarm status at a glance.

Receiver Features

The receiver has the following key features.
Front panel green light emitting diodes (LEDs) indicate operating status

Front panel red LED indicates alarm status

-20 dB test point on front panel, selectable between output 1 and output 2

Quad LC/PC optical input connector in OPM

Plug-and-play capability

Compatible with Intelligent Communications Interface Module (ICIM or ICIM2),

Local Craft Interface (LCI) software, ROSA software, Command Line Interface
(CLI) software, and the ICIM Web Interface
Blind-mate radio frequency (RF) connections on module back panel


Receiver Operation

The Cisco QEDR system is a set of long-haul transport products for CATV reverse
path applications. The system is designed to transport analog reverse path spectra
25