Cisco D9824 Installation And Configuration Manual page 114

Chapter 4 Front Panel Operation
Menu Item
Output Mode
92
Description
This selects the DPM
output mode.
Parameters
No Output - No MPEGoIP output will be
generated.
Passthrough - The output will be identical to
the input. The output channel will not be
modified.
PE/PID remapping options, PSI
regeneration and User Rate are not
supported in this mode.
Service Chans Only - Only service channels
will be output.
MAP Passthrough - The output will be
identical to the input, except that it will be
generated using the DPM and PID mapping
settings. If the input is tuned to a valid
channel, the PEs are automatically set to
Map. Otherwise, the PEs are automatically
set to Drop. When selecting MAP
Passthrough, the option to re-sync will be
provided. If you select Yes, it will set the
DPM mapping to match the current input. If
you select No, it will use the existing DPM
maps. If the PE is mapped, it uses the last
valid input. The output map (for example,
output channel PMT) does not change
automatically if the input or channel number
is changed.
MAP Svc Chans Only - Only service
channels will be output according to the
DPM and PID mapping settings. If the input
is tuned to a valid channel, the PEs are
automatically set to Map. Otherwise, the PEs
are automatically set to Drop. When
selecting MAP Svc Chans Only, the option to
re-sync will be provided. If you select Yes, it
will set the DPM mapping to match the
current input. If you select No, it will use the
existing DPM maps. If the PE is mapped, it
uses the last valid input. The output map
(for example, output channel PMT) does not
change automatically if the input or channel
number is changed.
Full DPM Control - The output will be
generated according to the DPM setting.
78-4039426-01 Rev D