Cisco D9824 Installation And Configuration Manual page 69

Menu Item
Pilot Present
C/N (dB)
C/N Margin (dB)
PER
PVBER
LDPCBER
AFC (MHz)
UEC
CEC
Clear Counts
ASI Link
Transport
Packet Size
Net Name
78-4039426-01 Rev D
Description
Indicates whether a Pilot is present for
the received signal. The Pilot is set on
the modulator for input signal
synchronization purposes.
Indicates the current Carrier-to-Noise
ratio.
Indicates the current Carrier-to-Noise
Margin for the received signal. The
Carrier-to-Noise margin is the actual
distance that C/N is from the noise
threshold.
Indicates the current PER (Packet Error
Rate) of the received signal (DVB-S2).
Indicates the PV (Post-Viterbi) BER for
the received signal (DVB-S).
Indicates the LDPC (Low Density Parity
Check) error rate for the received signal
(DVB-S2).
Indicates the current Automatic
Frequency Control count.
Indicates the current Uncorrected Error
Count for the received signal.
Indicates the current Corrected Error
Count for the received signal (DVB-S).
Select this option to clear the error
counters.
Indicates whether there is a transport
stream link error.
Indicates the current transport
synchronization status.
Indicates the packet size (in bytes) for
the ASI input.
Indicates the name assigned to the
network.
Status Menu
Parameters
Yes, No, or N/A
in dB
Values can be displayed in the
range of -32.0 to +30.0 dB.
in MHz
Error, Ok, or N/A
Error, Ok, or N/A
188, 204, or N/A
Up to 12 alphanumeric characters.
47