Cisco D9824 Installation And Configuration Manual page 205

11 Configure the input to output channel mapping in the Category drop-down.
Video and PCR can be output on the same PID or different PIDs. If output on the
same PID, they will appear identical to the input.
12 Click OK.
13 In the DPM General Setting section, set the following parameters:
Parameter
Remapping Mode
Duplication Method
Unreferenced Content
Service ID Output
PSI Table Output Option
PSI Regeneration Option
14 Click Table Options. The DPM Table Options (ASI) window is displayed.
15 Set the following parameters:
Parameter
PAT
CAT
PMT
TSDT
NIT
NITO
SDT
SDTO
BAT
EIT
TDT
RST
TOT
DIT
SIT
ECM
EMM
DRT
78-4039426-01 Rev D
Configuring Transport Stream Information
Description
Svc ID & PID
Pkt Copy
Drop
Valid Ch/All Ch
Ctl By Table
Always/As Needed
Description
Regen
Regen
Regen
Drop
Regen or Drop
Drop
Regen
Drop
Drop
Drop
Pass
Pass
Pass
Pass
Pass
Drop
Drop
Drop
183